TM 9-2320-366-20-4
7-129. REAR INTERVEHICULAR 24
VDC (12 Pin) CABLE REPLACEMENT
This task covers:
a. Removal
c. Follow-On Maintenance
b. Installation
INITIAL SETUP
Equipment Conditions
Materials/Parts
Batteries disconnected (para 7-57).
Tools and Special Tools
WARNING
working under vehicle due to the
possibility of falling debris. Failure to
comply may result in injury to personnel
a.
Removal.
NOTE
Note position of cover hinge and cable
key prior to removal.
Remove plastic cable ties as required.
(1) Disconnect connector J53 (1) from connector P53R
(2).
(2) Remove four nuts (3), lockwashers (4), screws (5), and
rear intervehicular 24 vdc cable (6) from vehicle.
Discard self-locking nuts.
b. Installation.
NOTE
Cover will hinge and cable keying will be
at 9 O'clock position for M1089. All
other vehicles will hinge and cable
keying will be at 12 O'clock position.
Install plastic cable ties as required.
(1) Install rear intervehicular 24 vdc cable (6) on vehicle
(2)
Connect connector J53 (1) to connector P53R (2).
c. Follow-On Maintenance.
Connect batteries (para 7-57).
End of Task.
Change 2