TM 9-2320-366-20-4
7-97. M1084/M1086 RIGHT JACK CYLINDER PROXIMITY SENSOR CABLE
REPLACEMENT (CONT)
NOTE
Tag wires and connection points prior to
disconnecting.
(4) Remove two screws (6) from terminal block (7) positions
6 and 11.
(5) Disconnect quick disconnect terminal (8) from ground
strip (9) position 14.
(6) Remove quick disconnect terminal (8) from red wire (10).
(7) Remove terminal lugs (11 and 12) from white wire (13)
and black wire (14).
(8) Loosen nut (15) on clamp (16).
(9) Remove compression nut (17) and washer (18) from
connector (19).
(10) Remove right jack cylinder proximity sensor cable (20)
from connector (19), washer (18) and compression nut
(17).
(11) Remove right jack cylinder proximity sensor cable
(20) from clamp (16).
7-478
