TM 9-2320-366-20-4
7-87. M1084/M1086 BOOM UP LOCKOUT SOLENOID CABLE REPLACEMENT (CONT)
b. Installation.
(1) Position boom up lockout solenoid cable (1) through
clamp (2).
(2) Position boom up lockout solenoid cable (1) through
compression nut (3), washer (4), and connector (5).
(3) Install washer (4) and compression nut (3) on connector
(5).
(4) Tighten nut (6) on clamp (2).
(5) Install quick disconnect terminal (7) on black wire (8).
(6) Install terminal lug (9) on white wire (10).
(7) Install quick disconnect terminal (7) on ground strip (11)
position 15.
(8) Install terminal lug (9) on terminal block (12) position 28
with screw (13).
(9) Apply varnish to quick disconnect terminal (7) and
terminal lug (9).
7-440
