TM 9-2320-366-20-4
7-86. M1084/M1086 BOOM DOWN SOLENOID CABLE REPLACEMENT (CONT)
b. Installation.
(1) Position boom down solenoid cable (1) through clamp
(2).
(2) Position boom down solenoid cable (1) through
compression nut (3), washer (4), and connector (5).
(3) Install washer (4) and compression nut (3) on connector
(5).
(4) Tighten nut (6) on clamp (2).
(5) Install quick disconnect terminal (7) on two black wires
(8).
(6) Install terminal lug (9) on white wire (10).
(7) Install quick disconnect terminal (7) on ground strip (11)
position 1.
(8) Install terminal lug (9) on terminal block (12) position 22
with screw (13).
(9) Apply varnish to quick disconnect terminal (7) and
terminal lug (9).
7-436