TM 9-2320-366-20-4
NOTE
Tag wires and connection points prior to
disconnecting.
(4) Remove screw (6) from terminal block (7) position 28.
(5) Disconnect quick disconnect terminal (8) from ground
strip (9) position 13.
(6) Remove quick disconnect terminal (8) from two black
wires (10).
(7) Remove terminal lug (11) from white wire (12).
(8) Loosen nut (13) on clamp (14).
(9) Remove compression nut (15) and washer (16) from
connector (17).
(10) Remove boom down lockout solenoid cable (18) from
connector (17), washer (16), and compression nut (15).
(11) Remove boom down lockout solenoid cable (18) from
clamp (14).
7-431
