TM 9-2320-366-20-4
7-84. M1083/M1084/M1085/M1086/M1090/M1092/M1093/M1094/M1096 REAR
LIGHTS CABLE ASSEMBLY REPLACEMENT (CONT)
(41) Install rear lights cable assembly (1) in clamp (43).
(42) Position terminal lug TL92 (44) and clamp (43) on right
frame rail ground stud (45) with self-locking nut (46).
(43) Tighten self-locking nut (46) to 84-108 lb-in. (10-12 Nm).
(44) Install rear lights cable assembly (1) in clamp (39).
(45) Position clamp (39) on bracket (40) with screw (41) and
self-locking nut (42).
(46) Tighten self-locking nut (42) to 84-108 lb-in. (10-12 Nm).
NOTE
Perform steps (47) through (58) on M1084,
M1085 and M1086.
(47) Install rear lights cable assembly (1) in clamp (36).
(48) Position clamp (36) on right frame rail (5) with screw (37)
and self-locking nut (38).
(49) Tighten self-locking nut (38) to 84-108 lb-in. (10-12 Nm).
7-414
Change 1
