TM 9-2320-366-20-4
NOTE
Perform steps (32) through (37) on M1083/
M1090/M1092/M1093 and M1094.
(32) Install rear lights cable assembly (1) in two clamps (39).
(33) Position two clamps (39) on brackets (40) with screws
(41) and self-locking nuts (42).
(34) Tighten two self-locking nuts (42) to 84-108 lb-in. (10-12
Nm).
(35) Install rear light cable assembly (1) in clamp (43).
(36) Position terminal lug TL92 (44) and clamp (43) on right
frame rail ground stud (45) with self-locking nut (46).
(37) Tighten self-locking nut (46) to 84-108 lb-in. (10-12 Nm).
NOTE
Perform steps (38) through (46) on M1084
and M1086.
(38) Install rear lights cable assembly (1) in two clamps (39).
(39) Position two clamps (39) on brackets (40) with screws
(41) self-locking nuts (42).
(40) Tighten two self-locking nuts (42) to 84-108 lb-in. (10-12
Nm).
Change 1
7-413