TM 9-2320-366-20-4
LIGHTS CABLE ASSEMBLY REPLACEMENT
This task covers:
a. Removal
c. Follow-On Maintenance
b. Installation
INITIAL SETUP
Equipment Conditions
Materials/Parts
Engine shut down (TM 9-2320-366-10-1).
Dispenser, Pressure Sensitive Adhesive Tape
Batteries disconnected (para 7-57).
(Item 20, Appendix D)
Kick panel removed (para 16-3).
Ties, Cable, Plastic (Item 69, Appendix D)
Lockwasher (14) (Item 82, Appendix G)
Lockwasher (3) (Item 96, Appendix G)
Nut, Self-Locking (14) (Item 150, Appendix G)
Tools and Special Tools
Tool Kit, Genl Mech (Item 46, Appendix C)
Nut, Self-Locking (13) (Item 128, Appendix G)
Goggles, Industrial (Item 15, Appendix C)
Washer, Spring (2) (Item 289, Appendix G)
Wrench, Torque, 0-200 lb-in. (Item 59, Appendix C)
Socket Set, Socket Wrench (Item 34, Appendix C)
Personnel Required
(2)
a. Removal.
NOTE
Note routing of rear lights cable assembly and
clamps prior to removal.
(1) Remove two self-locking nuts (1), clamps (2), and
screws (3) from left taillight carrier (4).
(2) Remove two clamps (2) from rear lights cable assembly
(5).
Change 1
