TM 9-2320-272-24-4
THIS TASK COVERS:
a. Disassembly
c. Assembly
b. Cleaning, Inspection, and Repair
INITIAL SETUP:
APPLICABLE MODELS
REFERENCES (TM)
M936/A1/A2
LO 9-2320-272-12
TM 9-2320-272-24P
SPECIAL TOOLS
EQUIPMENT CONDITION
Bushing installer (Appendix E, Item 23)
Handle (Appendix E, Item 61)
Extension cylinder removed (para. 4-196)
GENERAL SAFETY INSTRUCTIONS
TOOLS
Keep fire extinguisher nearby when using
General mechanic's tool kit (Appendix E, Item 1)
Spanner wrench (Appendix E, Item 166)
drycleaning solvent.
Drycleaning solvent is flammable and toxic. Do
MATERIALS/PARTS
not use near an open flame.
Wiper strip (Appendix D, Item 720)
Lockwire (Appendix D, Item 421)
O-ring (Appendix D, Item 467)
Packing (Appendix D, Item 510)
Crocus cloth (Appendix C, Item 20)
Drycleaning solvent (Appendix C, Item 71)
Lint-free cloth (Appendix C, Item 21)
1.
Using spanner wrench, remove cylinder head (21 from cylinder body (3).
2.
Remove piston rod (11 from cylinder body (3).
3.
Remove lockwire (14) and piston rod nut (15) from piston rod (1). Discard lockwire (14).
4.
Remove washer (13), two U-cup retainers (9), U-cups (10), piston (11), cylinder head (2), and wiper
strip (5) from piston rod (1). Discard wiper strip (5).
5.
Remove packing nut (4), packing (6), O-ring (8), and piston rod bushing (7) from cylinder head (2).
Discard O-ring (8) and packing (6).
6.
Remove two half rings (12) from piston (11).
5-626
