TM 9-2320-272-24-4
THIS TASK COVERS:
a. Removal
b. Installation
INITIAL SETUP:
APPLICABLE MODELS
EQUIPMENT CONDITION
M934/A1/A2
Parking brake set (TM 9-2320-272-10).
Battery ground cables disconnected (para. 3-126).
TOOLS
Ceiling filter and side panels removed (para. 5-79).
General mechanic's tool kit (Appendix E, Item 1)
REFERENCES (TM)
TM 9-2320-272-10
TM 9-2320272-24P
NOTE
Tag wires for installation.
1.
Remove
six screws (1) and cover (12) from load center (5).
2.
Remove
screw (3) and clamp (13) from wiring harness (2) and van body (4).
3.
Remove
screw (8) and wire (6) from neutral bus (7).
4.
Remove
three screws (10) and wires (11) from circuit breakers (9).
5.
Remove
twelve screws (16) and clamps (15) from van ceiling (14) and wiring harness (2).
6.
Remove
wiring harness (2) from van body (4).
1.
Position wiring harness (2) on van body (4).
2.
Install wiring harness (2) on van ceiling (14) with twelve clamps (15) and screws (16).
3.
Install three wires (11) on circuit breakers (9) with three screws (10).
4.
Install wire (6) on neutral bus (7) with screw (8).
5.
Install clamp (13) on wiring harness (2) and van body (4) with screw (3).
6.
Install cover (12) on load center (5) with six screws (1).
5-604
