TM 9-2320-272-24-4
Place bevel ring gear (21) in differential carrier housing (6) with hub and bearing (15) pointing
29.
toward bore (22).
Support bevel ring gear (21) with two soft-iron semicircular blocks. Use support adapter (23) as an
30.
alternate method.
NOTE
White carbonate pigment is used as high-pressure lubricant.
31.
Coat keyed end (19) of helical pinion gear (18) with pigment lubricant and align over bore in bevel
ring gear (21). Ensure machine key (17) is aligned with keyway in bevel ring gear (21).
Using arbor press, install keyed end (19) of helical pinion gear (18) in bore of bevel ring gear (21).
32.
NOTE
Light tapping with soft-head hammer or use of arbor press may be
needed to install bearing.
Remove blocks, turn differential carrier housing (6) over, and push bearing (15) into sleeve (16).
33.
5-449