TM 9-2320-272-24-4
5-64. DIFFERENTIAL AND DIFFERENTIAL CARRIER REPAIR (Contd)
c. Assembly and Adjustment
NOTE
Using bearing replacer, install inner bearing race (3) and outer bearing race (1) in retainer (2).
1.
Ensure thick edges of races (1) and (3) are toward center of retainer (2).
Install bearing (4) on hub of bevel pinion gear (6). Thick inner race (10) must be seated against back
2.
edge of teeth (5) on bevel pinion gear (6).
NOTE
White carbonate pigment is used as a high-pressure lubricant.
Coat long splined end (7) of mainshaft (9) with white carbonate pigment.
3.
Position bevel pinion gear (6) over mainshaft (9), ensuring internal splines in bevel pinion gear (6)
4.
align with splined end (7), and press bevel pinion gear (6) and bearing (4) onto mainshaft (9). Nose
of bevel pinion gear (6) must seat against shoulder (8).
Place mainshaft (7) in soft-jawed vise.
5.
NOTE
Collar is used to set preload on bevel pinion gear bearings. Ensure
collar removed in disassembly is installed for preload test.
Install spacer (14) on hub (15) of bevel pinion gear (6) next to bearing (16).
6.
Position small end (13) of retainer (12) over hub (15) and bearing (161 and place bearing (11) in
7.
retainer (12) over hub (15).
5-444
