TM 9-2320-272-24-4
5-47. FORWARD CLUTCH MAINTENANCE (Contd)
7.
Remove snapring (6) from forward clutch housing (16).
8.
Remove fourth clutch drive hub (5) and forward clutch hub (4) from forward clutch housing (16).
NOTE
Perform step 9 for transmission with three-piece bearing.
Remove bearing race (7), bearing (8), and bearing race (9) from forward clutch housing (16) or
9.
fourth clutch hub (5).
NOTE
Perform step 10 for transmissions with single-piece bearing
assembly.
Remove bearing assembly (3) from forward clutch housing (16).
10.
CAUTION
Keep all parts together. Intermixing forward clutch parts with any
other clutch pack will cause transmission damage.
NOTE
Tag all clutch parts for reassembly.
Remove six clutch plates (1) and six clutch discs (2) from forward clutch housing (16).
11.
NOTE
Use arbor press with compression tool for step 12.
Position compressor tool on spring retainer (11) and place on arbor press.
12.
13.
Apply pressure on spring retainer (11) and remove snapring (10) from forward clutch housing (16).
14.
Remove compressor tool from spring retainer (11) and arbor press.
15.
Remove spring retainer (11), piston return spring (12), piston (13), and piston inner seal ring (15)
from forward clutch housing (16). Discard piston inner seal ring (15).
Remove piston outer seal ring (14) from piston (13). Discard piston outer seal ring (14).
16.
Remove retainer pin (20), valve plug (19), valve spring (18), and centrifugal valve (17) from forward
17.
clutch housing (16).
5-324
