TM 9-2320-272-24-4
5-47. FORWARD CLUTCH MAINTENANCE (Contd)
2.
Locate opening (missing spline) in forward clutch housing (9) nearest snapring (12) gap.
3.
Press snapring (12) into groove in clutch housing (9) and insert one piece of shim stock (8) through
opening between snapring (12), Power Takeoff (PTO) gear (7), and teeth of clutch housing (9).
4.
Repeat step 3, inserting remaining pieces of shim stock (8) into PTO gear approximately 5 in.
(127 mm) apart.
5.
Lift PTO gear (7) off clutch housing (9).
6.
Remove snapring (12) and shim stock (8) from clutch housing (9).
5-323
