TM 9-2320-272-24-4
5-41. TRANSMISSION TORQUE CONVERTER MAINTENANCE (Contd)
d. Assembly
NOTE
l Steps 2 and 14 obtain measurements to select proper spacer
thickness. These measuring steps are treated as assembly steps.
l Steps 2 and 3 are performed only if new bearing is being
installed.
1.
Install ball bearing (5) in flywheel bore (7). Ensure ball bearing (5) seats against shoulder of
flywheel bore (7).
2.
Place straightedge (6) across flywheel bore (7) and measure the distance from inner race of ball
bearing (5) to straightedge (6). Record this measurement for use in step 14d.
5-291
