TM 9-2320-272-24-4
5-40. TRANSMISSION MOUNTING TO HOLDING FIXTURE (Contd)
b. Removal
WARNING
All personnel must stand clear during lifting operations.
A snapped cable, or swinging or shifting load, may cause
injury to personnel.
NOTE
Assistant will help with step 2.
1.
Attach lifting device and chain to transmission (1).
Remove pin (7) from holding fixture base (6) and loosen setscrew (5).
2.
3.
Support transmission (1) with chain and lifting device and remove transmission (1) and holding
fixture (8) from holding fixture base (6).
Remove six screws (4), washers (3), holding fixture (8), and holding plate (2) from transmission (1)
4.
and holding fixture (8).
5.
Install new gasket (9) and power takeoff cover (10) on transmission (1) with six screws (11).
6.
Remove lifting device and chain from transmission (1).
5-284
