TM 9-2320-272-24-4
5-33. MANIFOLD PRESSURE COMPENSATOR MAINTENANCE (Contd)
c. Cleaning and Inspection
NOTE
Remove gasket sealant from mating surfaces.
1.
For general cleaning instructions, refer to para. 2-14.
2.
For general inspection instructions, refer to para. 2-15.
d. Assembly
1.
Install
new O-ring (2) on manifold pressure compensator (1).
2.
Install
washer plate (8), new diaphragm (9), washer plate (10), and washer (11) on stop bolt (7) with
round
nut (12).
3.
Install
spring (6) and stop bolt (7) in manifold pressure compensator (1).
4.
Install
lever (3) on stop bolt (7) with washer (4) and new cotter pin (5).
e. Installation
NOTE
Perform step 1 to ensure manifold pressure compensator lever is
engaged to rocker arm in governor cover.
1.
Remove plug (24) from governor housing (23).
2.
Install manifold pressure compensator (1) on governor cover (22) with three washers (21), new
lockwashers (20), and screws (19).
3.
Install washer (25), new lockwasher (26), and new breakoff screw (27) on manifold pressure
compensator (1).
5-226
