TM 9-2320-272-24-4
5-31. MOUNTING FUEL INJECTION PUMP TO TEST STAND (Contd)
Remove four nuts (32), washers (33), screws (38), and washers (37) from adapter bracket (18).
9.
Loosen screw (20) and slide fuel pump (11) from drive coupling (39).
10.
Remove nut (13), lockwasher (14), drive hub (15), and woodruff key (25) from fuel pump (11).
11.
Discard lockwasher (14).
Remove fuel pump (11) from adapter bracket (18) and test stand (31).
12.
Install new copper washer (22) and screw plug (21) on fuel pump (11).
13.
Remove three screws (24), washers (23), and adapter ring (34) from adapter bracket (18).
14.
Remove screw (20), washer (19), adapter bracket (18), and clamp bar (36) from test stand (31).
15.
Remove two screws (26), washers (27), rear support bracket (30), and clamp bar (35) from test
16.
stand (31).
FOLLOW-ON TASK: Install fuel injection pump (para. 4-57).
5-213
