TM 9-2320-272-24-3
4-220. PERSONNEL FUEL BURNING HEATER FUEL SHUTOFF VALVE REPLACEMENT
THIS TASK COVERS:
a. Removal
b. Installation
INITIAL SETUP:
APPLICABLE MODELS
REFERENCES (TM)
All
TM 9-2320-272-10
TM 9-2320-272-24P
TOOLS
EQUIPMENT CONDITION
General mechanic's tool kit (Appendix E, Item 1)
Parking brake set (TM 9-2320-272-10).
MATERIALS/PARTS
GENERAL SAFETY INSTRUCTIONS
Antiseize tape (Appendix C, Item 72)
Cap and plug set (Appendix C, Item 14)
Diesel fuel is flammable. Do not perform this
procedure near open flames.
WARNING
Diesel fuel is flammable. Do not perform this procedure near open
flames. Injury to personnel may result.
CAUTION
Cover or plug all openings after disconnecting lines and hoses to
prevent contamination. Failure to do this may result in fuel pump
damage.
1.
Disconnect hose (4) from adapter (3).
2.
Remove adapter (3) from fuel shutoff valve (2).
3.
Remove fuel shutoff valve (2) from elbow (1).
NOTE
Clean all male pipe threads and wrap with antiseize tape before
installation.
1.
Install fuel shutoff valve (2) on elbow (1).
2.
Install adapter (3) on fuel shutoff valve (2).
3.
Connect hose (4) to adapter (3).
4-1014
