TM 9-2320-272-24-3
4-215. PERSONNEL FUEL BURNING HEATER (M939/A1) REPLACEMENT
THIS TASK COVERS:
b. Installation
a. Removal
INITIAL SETUP:
REFERENCES (TM)
APPLICABLE MODELS
TM 9-2320-272-10
M939/A1
TM 9-2320-272-24P
TOOLS
EQUIPMENT CONDITION
General mechanic's tool kit (Appendix E, Item 1)
l Parking brake set (TM 9-2320-272-10).
MATERIALS/PARTS
l Hood raised and secured (TM 9-2320-272-10).
Cotter pin ( Appendix D, Item 59)
GENERAL SAFETY INSTRUCTIONS
Diesel fuel is flammable. Do not perform this
procedure near open flames.
a. Removal
WARNING
Diesel fuel is flammable. Do not perform this procedure near open
flames. Injury to personnel may result.
Disconnect heater harness (2) from fuel burning heater (1).
1.
Disconnect fuel line (7) from heater elbow (6).
2.
Remove cotter pin (4) from exhaust tube (5) and fuel burning heater (1). Discard cotter pin (4).
3.
Loosen two clamps (3) and remove fuel burning heater (1) from clamps (3).
4.
b. Installation
Install fuel burning heater (1) into clamps (3) and tighten clamps (3).
1.
Install exhaust tube (5) on fuel burning heater (1) with new cotter pin (4).
2.
Connect fuel line (7) to heater elbow (6).
3.
Connect heater harness (2) to fuel burning heater (1).
4.
4-1004
