TM 9-2320-272-24-3
THIS TASK COVERS:
c. Assembly
a. Disassembly
b. Cleaning and Inspection
INITIAL SETUP:
REFERENCES (TM)
APPLICABLE MODELS
TM 9-2320-272-24P
M936/A1/A2
TM 9-214
TOOLS
EQUIPMENT CONDITION
General mechanic's tool kit (Appendix E, Item 1)
Transfer case PTO removed (para. 4-207).
Torque wrench (Appendix E, Item 144)
Dial indicator (Appendix E, Item 36)
GENERAL SAFETY INSTRUCTIONS
Soft-faced hammer
Arbor press
Keep fire extinguisher nearby when using
Feeler gauge
drycleaning solvent.
Drycleaning solvent is flammable and toxic. Do
not use near an open flame.
Adapter plug gasket (Appendix D, Item 220)
Shifter shaft O-ring (Appendix D, Item 486)
Oil seal (Appendix D, Item 504)
Cotter pin (Appendix D, Item 82)
Snapring (Appendix D, Item 661)
Woodruff key (Appendix D, Item 732)
Oil seal sleeve (Appendix D, Item 507)
Lint-free cloth (Appendix C, Item 21)
Drycleaning solvent (Appendix C, Item 71)
1.
Remove oil line (2) and adapter elbows (1) and (5) from oil pump housing (3) and bearing cap (4).
2.
Remove two nuts (10), washers (7), screws (6), washers (7), and PTO housing (9) from oil pump
adapter (8).
3.
Remove four screws (15) and washers (14) from bearing cap (4) and PTO housing (9).
NOTE
Tag shims for installation
4.
Remove bearing cap (4), shims (13), outer bearing race (12), and PTO shaft (11) from PTO
housing (9).
4-962
