TM 9-2320-272-24-3
THIS TASK COVERS:
b. Installation
a. Removal
INITIAL SETUP
REFERENCES (TM)
APPLICABLE MODELS
LO 9-2320-272-12
M936/A1/A2
TM 9-2320-272-10
TOOLS
TM 9-2320-272-24P
General mechanic's tool hit (Appendix E, Item 1)
EQUIPMENT CONDITION
Torque wrench (Appendix E, Item 144)
Transfer case PTO-to-hydraulic pump propeller
MATERIALS/PARTS
shaft removed (para. 3-334).
Oil seal (Appendix D. Item 627)
Cotter pin (Appendix D, Item 70)
Adhesive sealant (Appendix C, Item 4)
Cap and plug set (Appendix C, Item 14)
Antiseize tape (Appendix C, Item 72)
Remove cotter pin (1), washer (2), clevis pin (4), and clevis (3) from transfer case Power Takeoff
1.
(PTO) select lever (5). Discard cotter pin (1).
NOTE
Have drainage container ready to catch oil.
Disconnect transfer case oil return line (9) from adapter (10) and plug opening of transfer case oil
2.
return line (9).
Remove adapter (10) from PTO unit (11).
3.
Remove six screws (6) and washers (7) from transfer case (8).
4.
Remove PTO unit (11) from transfer case (8).
5.
Remove setscrew (12) from PTO oil pump drive gear assembly (15).
6.
Slide PTO oil pump drive gear assembly (15) off transfer case main input shaft (13).
7.
Remove oil seal (14) from PTO oil pump drive gear assembly (15). Discard oil seal (14).
8.
4-958
