TM 9-2320-272-24-3
4-95. TRANSFER CASE (M936/A1/A2) REPLACEMENT (Contd)
b. Installation
1.
Install control valve bracket (2) on transfer case (3) with three screws (1). Finger-tighten
screws (1).
2.
Install interlock valve bracket (4) on transfer case (3) with two screws (5). Tighten screws (1) and (5)
30-40 lb-ft (41-54 Nm).
3.
Install interlock valve (11) on interlock valve bracket (4) with two screws (15).
4.
Install elbow (12) on air cylinder cover (13).
5.
Install elbow (9) on interlock air cylinder (10).
6.
Install vent tees (7) and (16) and fitting (8) on inspection cover (14).
7.
Install three elbows (6) on vent tees (7) and (16).
8.
Using lifting device, position transfer case (3) on hydraulic jack.
4-542
