TM 9-2320-272-24-3
4-94. TRANSFER CASE REPLACEMENT (Contd)
Install parking brake cable bracket (6) on transfer case (1) with two washers (7) and screws (8).
9.
Tighten screws (8) 40-55 lb-ft (54-75 Nm).
Install control valve bracket (5) on transfer case (1) with three screws (2). Finger-tighten screws (2).
10.
Install interlock valve bracket (4) on transfer case (1) with two screws (3). Finger-tighten screws (3).
11.
NOTE
Wrap all male pipe threads with antiseize tape before installation.
Install elbow (11) on interlock air cylinder (12).
12.
Install elbow (13) on air cylinder (14).
13.
Install fitting (16) and vent tees (10) and (17) on inspection cover (15).
14.
Install three elbows (9) on vent tees (10) and (17).
15.
Connect supply line (19) to interlock air cylinder elbow (11).
16.
Connect supply line (20) to air cylinder elbow (13).
17.
Connect interlock vent line (18) to elbow (9).
18.
Connect two vent lines (21) to elbows (9).
19.
Install clamp (22) with parking brake cable (26), and clamp (24) with speedometer driveshaft (23),
20.
on transfer case (1) with screw (25).
Tighten screws (2) and (3) 30-40 lb-ft (41-54 Nm).
21.
4-534
