TM 9-2320-272-24-3
4-94. TRANSFER CASE REPLACEMENT (Contd)
b. Installation
Install seven etude (1) on transfer case (2).
1.
Place transfer case (2) on hydraulic jack and position under vehicle.
2.
Raise transfer case (2) in position high enough to allow for installation of mounting brackets (6).
3.
Install two mounting brackets (6) on transfer case (2) with seven new locknuts (10). Tighten
4.
locknuts (10) 125-135 lb-ft (170-183 Nm).
5.
Place three insulators (7) between mounting brackets (6) and frame (8).
6.
Slowly lower transfer case (2) and align holes in mounting brackets (6), insulators (7), and
frame (8).
7.
Install three insulators (5), washers (3), screws (4), and new locknuts (9) on mounting
brackets (6) and frame (8). Tighten locknuts (9) 50-60 lb-ft (68-81 Nm).
Remove hydraulic jack from transfer case (2).
8.
4-532
