TM 9-2320-272-24-3
4-77. TRANSMISSION MOUNT BUSHING REPLACEMENT
THIS TASK COVERS:
a. Removal
b. Installation
INITIAL SETUP:
APPLICABLE MODELS
REFERENCES (TM)
All
TM 9-2320-272-10
TM 9-2320-272-24P
TOOLS
EQUIPMENT CONDITION
General mechanic's tool kit (Appendix E, Item 1)
Torque wrench (Appendix E, Item 144)
Parking brake ret (TM 9-2320-272-10).
MATERIALS/PARTS
Two lockwashers (Appendix D, Item 350)
Two lockwashers (Appendix D, Item 392)
a. Removal
1.
Remove screw (2), lockwasher (1), two screws (3), lockwashers (4), and bracket (5) from
transmission (7) and bushing (10). Discard lockwashers (1) and (4).
2.
Remove screw (8), lockwasher (9), and bushing (10) from crossmember (6). Discard lockwasher (9).
b. Installation
1.
Install bushing (10) on bracket (5) with new lockwasher (1) and screw (2), Tighten screw (2)
75-83 lb-ft (102-113 Nlm).
2.
Install bracket (5) and bushing (10) on crossmember (6) with new lockwasher (9) and screw (8).
Tighten screw (8) 75-83 lb-ft (102-113 Nlm).
3.
Install bracket (5) on transmission (7) with two new lockwashers (4) and screws (3). Tighten
screws (3) 75-83 lb-ft (102-113 Nlm).
4-492
