TM 9-2320-272-24-3
4-41. ROCKER LEVERS, PUSH RODS, AND CYLINDER HEAD REPLACEMENT (Contd)
14.
Connect ether supply tube (1) on atomizer nozzle (21).
15.
Install fuel supply tube (4) on cylinder head (8) with new washers (5) and (20), adapter (19), and
screw (18).
16.
Install fuel supply tube (6) on cylinder head (8) with new washers (7) and (9) and screw (15).
d. Rocker Levers and Push Rods Installation
NOTE
Apply light coat of oil to all parts before installation.
1.
Install twelve push rods (25) in cylinder head (8).
2.
Position oil manifold (30) on cylinder head (8) with flat surface facing downward.
3.
Install six rocker lever supports (26) and rocker lever assemblies (27) on cylinder head (8) and oil
manifold (30) with six retaining clamps (28) and twelve screws (29). Tighten screws (29) 55 lb-ft
(75 Nm).
FOLLOW-ON TASKS:
Install
fan clutch and hose (para. 3-74).
Install
exhaust manifold (para. 4-50).
Install
aftercooler (para. 3-76).
Install
fuel injector tubes (para. 3-19).
Install
valve cover (para. 3-6).
4-289
