TM 9-2320-272-24-2
NOTE
Perform steps 7 and 8 for early model engines and step 9 for late
model engines.
Install breather tube (1) on breather hose (3) and tighten hose clamp (2).
7.
Install breather tube mounting bracket (5) on engine block (4) with new lockwasher (7) and
8.
screw (6).
Install breather tube (10) on breather (8) and elbow (11) and tighten two hose clamps (9).
9.
Install new gasket (12) and engine access cover (13) on engine block (4) with four washers (14), new
10.
lockwashers (15), and screws (16).
Install power steering pump bracket (23) and power steering pump (19) on engine bracket (24) with
11.
two washers (20), new lockwashers (21), and screws (22).
Install two drivebelts (17) on pulley (18).
12.
Install adjustable link (27) on power steering pump bracket (23) with washer (28), screw (29),
13.
washer (26), and new locknut (25).
4-112
