TM 9-2320-272-24-2
WARNING
Lifting device must have a weight capacity greater than the
combined weight of the engine and transmission to prevent
injury or death to personnel and damage to equipment.
All personnel must stand clear during hoisting operations.
A snapped cable, or swinging or shifting load, may result in
injury or death to personnel.
1.
Attach utility chain and lifting device to two engine lifting eyes (5) and remove excess slack from
utility chains.
NOTE
Assistant will help with steps 1 and 2.
2.
Remove four bolts (2), washers (1), engine (4), and two spacers (3) from engine stand.
3.
Position and mount engine (4) on engine transporter.
4.
Install oil cooler (6) and new gasket (11) on cylinder block (10) with five new lockwashers (12) and
screws (13).
5.
Connect air compressor coolant line (9) and new packing sleeve (8) to oil cooler elbow (7).
6.
Install exhaust manifold (15) and six new gaskets (16) on three cylinder heads (14) with six
clamps (19), twelve new locktabs (18), and screws (17).
4-110