TM 9-2320-272-24-2
4-4. POWER PLANT (M939/A1) REPLACEMENT (Contd)
15.
Remove screw (19) and connector (11) from emergency stop cable (13).
16.
Remove nut (18), screw (15), washer (14), and clamp (16) from bracket (17), and pull cable (13)
through swivel block (12).
17.
Install connector (11) on cable (13) with screw (19).
18.
Install clamp (16) on bracket (17) with screw (15), washer (14), and nut (18).
19.
Remove nut (22) and two wires (21) from fuel shutoff solenoid (20).
20.
Remove locknut (24), screw (26), and accelerator rod (25) from throttle lever (23), and tie accelerator
rod (25) clear of engine. Discard locknut (24).
21.
Remove locknut (27), screw (36), and link (28) from throttle lever (23). Discard locknut (27).
22.
Remove return spring (35), two nuts (32), screws (34), cable clamp (33), and shim (31) from fuel
primer pump bracket (30).
23.
Remove modulator cable (29) from fuel primer pump bracket (30), and tie cable (29) clear of engine.
4-39
