TM 9-2320-272-24-2
Remove twelve locknuts (3), washers (4), screws (7), washers (8), four braces (2), and ammo tray
1.
supports (1) from two ammo box trays (5). Discard locknuts (3).
2.
Remove four strap assemblies (6) from two ammo box trays (5).
NOTE
Spacers were used as needed to center lockpin in lockring.
Number of spacers in bearing assembly and lockring may vary.
Remove two locknuts (41), washers (42), screws (39), lock assembly (43), and spacers (44) from
3.
bearing assembly (20) and lockring (40). Discard locknuts (41).
Remove two locknuts (26), washers (27), screws (11), four locknuts (24), washers (25), screws (12),
4.
and armament mount panel (10) from armament support assembly (28). Discard locknuts (26)
and (24).
Remove locknut (29), washer (30), screw (9), and pin assembly (31) from armament mount panel (10).
5.
Discard locknut (29).
NOTE
Tag all hardware for assembly.
Remove six locknuts (21), washers (22), and screws (13) from tube (23), bearing assembly (20), and
6.
armament support assembly (28). Discard locknuts (21).
Remove two locknuts (37), washers (38), screws (35), and backrests (36) from bearing assembly (20)
7.
and armament support assembly (28). Discard locknuts (37).
Remove seven locknuts (34), washers (33), and screws (32) from armament support assembly (28)
8.
and bearing assembly (20). Discard locknuts (34).
Remove locknut (19), washer (18), screw (17), and armament support assembly (28) from bearing
9.
assembly (20). Discard locknut (19).
Remove four locknuts (16), screws (14), and handle (15) from armament support assembly (28). Discard
10.
locknuts (16).
3-1168
