TM 9-2320-272-24-2
Remove two cotter pins (2) and pin (6) from top hole in right front post assembly (1). Discard cotter
13.
pins (2).
Remove three locknuts (3) and screws (5) from right front post assembly (1) and right post
14.
support (4). Lift right front post assembly (1) out of right front post support (4). Discard
locknuts (3).
Remove five locknuts (9) and screws (10) from right post support (8) and right front brace
15.
assembly (7). Discard locknuts (9).
Remove two screws (15) and screw (14) from instrument panel (11) and right door pillar (12).
16.
Remove four screws (13) and right post support (8) from right door pillar (12).
17.
Remove four screws (19), washers (18), right front brace assembly (20), and tapping plate (16) from
18.
outer cowl wall (17) and inside of door pillar wall (21).
Remove two cotter pins (24) and pin (23) from top hole of left front post assembly (22). Discard
19.
Remove three locknuts (27) and screws (25) from left front post assembly (22) and left post support (26)
20.
and lift left front post assembly (22) out of left post support (26). Discard locknuts (27).
3-1164