TM 9-2320-272-24-2
11.
Remove eighteen screws (14), washers (15), and three lockrings (12) from inner ring of support
assembly (13).
12.
Remove twelve locknuts (11), washers (10), screws (8), washers (9), and bearing assembly (7) from
support assembly (1). Discard locknuts (11).
13.
Remove twelve locknuts (2), washers (3), screws (5), washers (6), and two reinforcements (4) from
support assembly (1). Discard locknuts (2).
1.
Install two reinforcements (4) on support assembly (1) with twelve washers (6), screws (5), washers (3),
and new locknuts (2).
2.
Install bearing assembly (7) on support assembly (1) with twelve washers (9), screws (8),
washers (10), and new locknuts (11).
3.
Install three lockrings (12) to inner ring of support assembly (13) with eighteen washers (15) and
screws (14).
3-1170