TM 9-2320-272-24-2
Attach four utility chains and lifting device to lightweight weapon station platform (11).
3.
Remove four locknuts (9). washers (8), plates (7), roof mounts (6), and spacers (5) from screws (1),
4.
lightweight weapon station platform (11), and four post assemblies (10). Discard locknuts (9).
5.
Remove four screws (1) and washers (2) from lightweight weapon station platform (11).
6.
Raise lightweight weapon station platform (11) and remove four plates (3) and roof mounts (4) from
four post assemblies (10).
7.
Remove fourteen locknuts (14), washers (13), seven U-bolts (17), short crossmember
assembly (18), and long crossmember assembly (12) from lightweight weapon station platform (11).
Discard locknuts (14).
8.
Place lightweight weapon station platform (11) on blocking so inner ring (16) of support
assembly (15) is accessible and remove lifting device from lightweight weapon station platform (11).
NOTE
Left and right rear post assemblies are removed the same way.
This procedure is for the right rear post assembly.
Remove two locknuts (20) and U-bolt (24) from right rear cab support (21). Discard locknuts (20).
9.
Remove right rear post assembly (10) from U-bolts (23) and (22) on right rear cab support (21).
10.
11.
Remove two cotter pins (19) and pin (25) from bottom hole in right rear post assembly (10). Discard
cotter pins (19).
12.
Remove four locknuts (20) and U-bolts (23) and (22) from right rear cab support (21). Discard
locknuts (20).
3-1162
