TM 9-2320-272-24-2
3-436. CONVOY WARNING LIGHT RESISTOR AND LEADS REPLACEMENT
THIS TASK COVERS:
a. Removal
b. Installation
APPLICABLE MODELS
REFERENCES (TM)
All
TM 9-2320-272-10
TM 9-2320-272-24P
TOOLS
EQUIPMENT CONDITION
General mechanic's tool kit (Appendix E, Item 1)
Parking brake set (TM 9-2320-272-10).
MATERIALS/PARTS
Hood raised and secured (TM 9-2320-272-10).
Two lockwashers (Appendix D, Item 406)
Battery ground cables disconnected (para. 3-126).
Tiedown strap (Appendix D. Item 691)
Two lockwashers (Appendix D, Item 418)
NOTE
Tag all leads for installation.
Note routing of all leads for installation.
Disconnect leads (1) and (2) from warning light switch (3).
1.
Remove tiedown strap (27) from front main wiring harness (21) and leads (17) and (20). Discard
2.
tiedown strap (27).
NOTE
Assistant will help with step 3.
Remove two screws (30), washers (31), lockwashers (4), retainer (29), and grommet (7) from
3.
firewall (10). Discard lockwashers (4).
Pull leads (1) and (2) through hole in firewall (10).
4.
Remove four screws (5), clips (6), and leads (2), (9), (16), and (28) from resistor (8).
5.
Remove two screws (15), lockwashers (14), lead (28), and resistor (8) from tirewall (10). Discard
6.
lockwashers (14).
Disconnect lead (17) from high-beam selector switch (18).
7.
Disconnect leads (11) and (13) from circuit breaker (12).
8.
Remove nut (24), lockwasher (23), and wires (25) and (26) from starter solenoid (22). Discard
9.
lockwasher (23).
Disconnect lead (19) from connector (20).
10.
3-l124
