TM 9-2320-272-24-2
3-435. CONVOY WARNING LIGHT HARNESS (M934A1/A2) REPLACEMENT
THIS TASK COVERS:
a. Removal
b. Installation
APPLICABLE MODELS
REFERENCES (TM)
M934A1/A2
TM 9-2320-272-10
TM 9-2320-272.24P
TOOLS
General mechanic's tool kit (Appendix E, Item 1)
EQUIPMENT CONDITION
Parking brake set (TM 9-2320-272-10).
MATERIALS/PARTS
Convoy warning lights removed (para. 3-437).
Seven screw-assembled lockwashers
(Appendix D, Item 576)
Locknut (Appendix D, Item 288)
Two tiedown straps (Appendix D, Item 684)
NOTE
Note routing of harness for installation.
1.
Remove two tiedown straps (3) and harness (4) from two support tubes (2) and van body (1). Discard
tiedown straps (3).
Remove twenty-five screws (5), clamps (6), and harness (4) from van body (1).
2.
Remove four screw-assembled lockwashers (19), washers (20), clamps (21), and harness (4) from van
3.
body (1). Discard screw-assembled lockwashers (19).
4.
Remove five screws (18), clamps (17), and harness (4) from van body (1).
Remove three screw-assembled lockwashers (14), washers (15), clamps (16), and harness (4) from
5.
van body (1). Discard screw-assembled lockwashers (14).
Disconnect harness lead (13) from lead (12).
6.
Remove locknut (11), washer (9), screw (7), washer (9), and ground lead (8) from fuel tank support (10).
7.
Discard locknut (11).
3-1120
