TM 9-2320-272-24-2
3-437. CONVOY WARNING LIGHT REPLACEMENT
THIS TASK COVERS:
b. Installation
a. Removal
REFERENCES (TM)
APPLICABLE MODELS
TM 9-2320-272-10
All
TM 9-2320-272-24P
TOOLS
General mechanic's tool kit (Appendix E, Item 1)
EQUIPMENT CONDITION
Parking brake set (TM 9-2320-272-10).
MATERIALS/PARTS
Battery ground cables disconnected (para. 3-126).
Three locknuts (Appendix D, Item 297)
1.
Disconnect two leads (13) from cable leads (12).
2.
Loosen three screws (4), rotate clamps (5) 1/2-turn counterclockwise, and remove dome (1) from
base (6).
3.
Remove three locknuts (2), washers (3), and base (6) from support plate (9).
4.
Remove nut (16), washer (15), clamp (14), and two leads (13) from toggle bolt (11).
5.
Remove two leads (13) and seal (7) from support plate (9).
6.
Remove three oval nuts (8), support plate (9), and three toggle bolts (11) from mounting plate (10).
1.
Install support plate (9) on mounting plate (10) with three toggle bolts (11) and oval nuts (8).
2.
Install two leads (13) and seal (7) on support plate (9).
3.
Install two leads (13) on toggle bolt (11) with clamp (14), washer (15), and nut (16).
4.
Install base (6) on support plate (9) with three washers (3) and new locknuts (2).
5.
Install dome (1) on base (6), rotate clamps (5) 1/2-turn clockwise, and tighten three screws (4).
6.
Connect two leads (13) to cable leads (12).
3-1128
