TM 9-2320-272-24-2
3-432. CONVOY WARNING LIGHT MOUNT (M929/A1/A2, M930/A1/A2)
REPLACEMENT
THIS TASK COVERS:
a. Removal
b. Installation
REFERENCES (TM)
APPLICABLE MODELS
TM 9-2320-272-10
M929/A1/A2, M930/A1/A2
TM 9-2320-272-24P
TOOLS
EQUIPMENT CONDITION
General mechanic's tool kit (Appendix E, Item 1)
Parking brake set (TM 9-2320-272-10).
MATERIALS/PARTS
Convoy warning light removed (para. 3-437).
Four locknuts (Appendix D, Item 288)
NOTE
Right and left convoy warning light mounts are replaced the same.
This procedure covers the right mount only
1.
Disconnect two cable leads (8) from harness leads (7).
2.
Remove two cable leads (8) from support tube (2) and mounting bracket (11).
3.
Remove wing screw (3) and support tube (2) from mounting bracket (11).
4.
Remove mounting plate (1) from support tube (2).
5.
Remove four locknuts (5), washers (4), screws (10), washers (9), and mounting bracket (11) from cab
protector (6). Discard locknuts (5).
1.
Install mounting bracket (11) on cab protector (6) with four washers (9), screws (10), washers (4),
and new locknuts (5).
2.
Install mounting plate (1) on support tube (2).
3.
Install support tube (2) on mounting bracket (11) with wing screw (3).
4.
Install two cable leads (8) on support tube (2) and mounting bracket (11).
5.
Connect two cable leads (8) to harness leads (7).
3-1112
