TM 9-2320-272-24-2
THIS TASK COVERS:
a. Bracket Removal (M923, M925,
d.
Bracket
Installation (M931, M932)
M927, M928)
e.
Bracket
Removal (M929, M930)
b. Bracket Installation (M923, M925,
f.
Bracket
Installation (M929, M930)
M927, M928)
g.
Bracket
Removal (M929A1, M930A1)
c. Bracket Removal (M931, M932)
h.
Bracket
Installation (M929A1, M930A1)
INITIAL SETUP:
APPLICABLE MODELS
REFERENCES (TM)
M923, M925, M927, M928, M929/A1, M930/A2,
TM 9-2320-272-10
M931, M932
TM 9-2320-272-24P
TOOLS
EQUIPMENT CONDITION
General mechanic's tool kit (Appendix E, Item 1)
Parking brake set (TM 9-2320-272-10).
MATERIALS/PARTS
Four locknuts (M923, M925, M927, M928,
M929A1, M930A1, M931, M9321
(Appendix D, Item 291)
Five locknuts (M931, M932)
(Appendix D, Item 291)
Eight locknuts (M929, M930)
(Appendix D, Item 376)
1.
Open toolbox door (3).
2.
Remove four locknuts (5), washers (6), screws (1), and bracket (2) from toolbox (4). Discard
locknuts (5).
b. Bracket Installation (M923, M925, M927, M928)
1.
Install bracket (2) on toolbox (4) with four screws (1), washers (6), and new locknuts (5).
2.
Close toolbox door (3).
1.
Open toolbox door (11).
2.
Remove five locknuts (10), washers (9), screws (8), and bracket (7) from toolbox (4). Discard
locknuts (10).
1.
Install bracket (7) on toolbox (4) with five screws (8), washers (9), and new locknuts (10).
2.
Close toolbox door (11).
3-1052
