TM 9-2320-272-24-2
THIS TASK COVERS:
b. Installation
a. Removal
INITIAL SETUP:
APPLICABLE MODELS
REFERENCES (TM)
TM 9-2320-272-10
M934/A1/A2
TM 9-2320-272-24P
TOOLS
General mechanic's tool kit (Appendix E, Item 1)
EQUIPMENT CONDITION
Parking brake set (TM 9-2320-272-10).
MATERIALS/PARTS
Rear doors open (TM 9-2320-272-10).
Four lockwashers (Appendix D, Item 400)
NOTE
Blackout switch striker is removed with door check arm bracket
on all doors except left rear.
1.
Remove two screws (9), lockwashers (8), door check arm bracket (12), and two washers (2) from edge
of door (1) and blackout switch striker (13). Discard lockwashers (8).
2.
Remove screw (10), washer (11), and blackout switch striker (13) from edge of door (1).
3.
Remove two nuts (5), lockwashers (6), screws (3), and door check (7) from bracket (4). Discard
lockwashers (6).
1.
Install door check (7) on bracket (4) with two screws (3), new lockwashers (6), and nuts (5).
2.
Install blackout switch striker (13) on edge of door (1) with washer (11) and screw (10).
3.
Install two washers (2) and door check arm bracket (12) on edge of door (1) with two new
lockwashers (8) and screws (9).
FOLLOW-ON TASK: Close rear doors (TM 9-2320-272-10).
3-906