TM 9-2320-272-24-2
THIS TASK COVERS:
b. Installation
a. Removal
INITIAL SETUP:
REFERENCES (TM)
APPLICABLE MODELS
TM 9-2320-272-10
M934/A1/A2
TM 9-2320-272-24P
TOOLS
General mechanic's tool kit (Appendix E, Item 1)
EQUIPMENT CONDITION
Parking brake set, (TM 9-2320-272-10).
NOTE
All panel seals are installed by retainers with either screws or
screws and nuts. This procedure shows screws only. The quantity
of screws also may differ.
1.
Raise panel seal (4) to expose screws (2).
2.
Remove screws (2), as required, retainer (3), and panel seal (4) from van body (1).
1.
Position retainer (3) in flap of panel seal (4) and align holes.
2.
Install panel seal (4) and retainer (3) on van body (1) with screws (2), as required.
3-904