TM 9-2320-272-24-2
THIS TASK COVERS:
b. Installation
a. Removal
INITIAL SETUP:
REFERENCES (TM)
APPLICABLE MODELS
TM 9-2320-272-10
M934/A1/A2
TM 9-2320-272-24P
TOOLS
General mechanic's tool kit (Appendix E, Item 1)
EQUIPMENT CONDITION
Parking brake set (TM 9-2320-272-10).
MATERIALS/PARTS
Rear doors open (rear door handle and lock
replacement only) (TM 9-2320-272-10).
NOTE
This procedure applies to van side and rear doors.
1.
Remove pin (10) and inner handle (8) from handle shank (9).
2.
Remove two cotter pins (1), vertical bars (2), and washers (3) from lockpins (4). Discard cotter pins (1).
3.
Remove four screws (7) and door lock (6) from door (5).
1.
Install door lock (6) on door (5) with four screws (7).
2.
Install two vertical bars (2) on lockpins (4) with two washers (3) and new cotter pins (1).
3.
Install inner handle (8) on handle shank (9) with pin (10).
FOLLOW-ON TASK: Close rear doors (rear door handle and lock replacement only) (TM-9-2320-272-10).
3-905