TM 9-2320-272-24-1
3-201. WET AIR RESERVOIR (SUPPLY TANK) AND MOUNTING PLATE (M936/A1/A2)
REPLACEMENT
THIS TASK COVERS:
b. Installation
a. Removal
INITIAL SETUP:
REFERENCES (TM)
APPLICABLE MODELS
TM 9-2320-272-10
M936/A1/A2
TM 9-2320-272-24P
TOOLS
General mechanic's tool kit (Appendix E, Item 1) EQUIPMENT CONDITION
l Parking brake set (TM 9-2320-272-10).
MATERIALS/PARTS
l Air reservoirs drained (TM 9-2320-272-10).
Four locknuts (Appendix D, Item 291)
GENERAL SAFETY INSTRUCTIONS
Antiseize tape (Appendix C, Item 72)
Do not disconnect air lines before draining air
reservoirs.
WARNING
Do not disconnect air lines before draining air reservoirs. Small
parts under pressure may shoot out with high velocity, causing
injury to personnel.
CAUTION
Anchor tank boss fittings with an open-end wrench before
removing connecting fittings. Failure to do so may result in
damage to equipment.
a. Removal
1.
Disconnect primary tank air line (1) from elbow (2).
2.
Disconnect trailer emergency air line (5) from elbow (6).
3.
Disconnect auxiliary air line (3) from elbow (4).
4.
Disconnect supply tank input air line (16) from adapter (15).
5.
Disconnect secondary tank air line (14) from adapter (13).
6.
Disconnect drain line (12) from adapter (11).
7.
Remove four locknuts (9), two U-bolts (8), and supply tank (7) from support plate (10). Discard
locknuts (9).
3-556
