TM 9-2320-272-24-1
3-200. WET AIR RESERVOIR (SUPPLY TANK) AND BRACKET REPLACEMENT (Contd)
NOTE
Perform steps 9 through 14 for M934/A1/A2 vehicles.
9.
Disconnect secondary tank air line (1) from adapter (2).
10.
Disconnect trailer emergency air line (5) from elbow (6).
11.
Remove four screws (11) and support plate (9) from frame (12).
12.
Remove four locknuts (10), two U-bolts (8), and supply tank (7) from support plate (9). Discard
locknuts (10).
CAUTION
Open-end wrench must be used to anchor tank boss fittings when
connecting or disconnecting associated fittings. Damage to tank
bosses may result if open-end wrench is not used.
13.
Remove
adapter (2), shutoff valve (3), and elbow (4) from supply tank (7).
14.
Remove
elbow (6) from supply tank (7).
15.
Remove
adapters (26) and (25) from supply tank (7).
16.
Remove
elbow (18), relief valve (19), nipple (17), and reducer (16) from tee (15).
17.
Remove
elbow (13), shutoff valve (14), tee (15), and nipple (27) from supply tank (7).
18.
Remove
adapter (21), shutoff valve (22), nipple (23), and elbow (24) from supply tank (7).
19.
Remove
elbow (20) from supply tank (7).
20.
Remove
elbow (30), safety valve (28), reducer (29), and tee (31) from supply tank (7).
3-550
