TM 9-2320-272-24-1
3-200. WET AIR RESERVOIR (SUPPLY TANK) AND BRACKET REPLACEMENT
THIS TASK COVERS:
a. Removal
b. Installation
INITIAL SETUP:
APPLICABLE MODELS
REFERENCES (TM)
All except M936/A1/A2
TM 9-2320-272-10
TM 9-2320-272-24P
TOOLS
General mechanic's tool kit (Appendix E, Item 1) EQUIPMENT CONDITION
l Parking brake ret (TM 9-2320-272-10).
MATERIALS/PARTS
l Air reservoirs drained (TM 9-2320-272-10).
Eight locknuts (Appendix D, Item 291)
GENERAL SAFETY INSTRUCTIONS
Antiseize tape (Appendix C, Item 72)
Do not disconnect air lines before draining air
reservoirs.
WARNING
Do not disconnect air lines before draining air reservoirs. Small
parts under pressure may shoot out with high velocity, causing
injury to personnel.
a. Removal
NOTE
Tag air liner for installation.
1.
Disconnect drain line (12) from adapter (11).
2.
Disconnect primary tank air line (14) from elbow (13).
3.
Disconnect auxiliary air line (1) from elbow (2).
4.
Disconnect trailer emergency air line (6) from elbow (3).
5.
Disconnect secondary tank air line (4) from adapter (5).
6.
Disconnect supply tank input air line (15) from elbow (16).
7.
Remove four locknuts (8), two U-bolts (7), and supply tank (9) from two support brackets (10).
Discard locknuts (8).
8.
Remove four locknuts (18), screws (17), and two support brackets (10) from frame brace (19).
Discard locknuts (18).
3-548
