TM 9-2320-272-24-l
3-176. PARKING BRAKESHOES REPLACEMENT (Contd)
1.
Install actuating plate (5) against brakeshoe backing plate (8) so retainer opening (6) fits over
retaining stud (1) of backing plate (8).
2.
Install two brakeshoes (4) on backing plate shoe studs (7) with two shoe return springs (2). Ensure
springs (2) are attached to inside holes (3) of brakeshoes (4).
3.
Install eight stude (10) on parking brakedrum (11).
Install parking brakedrum (11) and transfer output shaft flange (12) on transfer output shaft (9)
4.
with washer (13) and thrust nut (14). Tighten thrust nut (14) 450-600 lb-ft (610-814
3-492
