TM 9-2320-272-24-1
3-175. PARKING BRAKE CABLE AND BRACKET REPLACEMENT (Contd)
1.
Install transfer case bracket (13) on transfer case (2) with two washers (5) and screws (6).
2.
Install threaded end of parking brake cable (4) on brakedrum lever (12) with nut (11).
3.
Position spacer (9) between transfer case bracket (13) and clamp (8), and install parking brake
cable (4) on transfer case bracket (13) with spacer (9), clamp (8), two screws (7), and new locknuts (10).
4.
Install parking brake cable (4) on cable clamp bracket (21) with clamp (26), spacer (27), two
screws (25), and new locknuts (28).
5.
Install grommet (20) around cable (4) and in cab floor (23).
NOTE
Assistant will help with step 6.
6.
Install cable clamp bracket (21) and two parking lever brackets (18) on cab floor (23) with four
screws (17) and new locknuts (22).
7.
Install parking brake cable (4) on parking brake lever (24) with clevis pin (19), washer (16), and
new cotter pin (15).
8.
Install four new tiedown straps (3) on parking brake cable (4).
9.
Install two clamps (14) on transfer case (2) with screw (1).
3-488
