TM 9-2320-272-24-1
3-142. TRANSMISSION OIL COOLER HOSES REPLACEMENT
THIS TASK COVERS:
b. Installation
a. Removal
INITIAL SETUP:
APPLICABLE MODELS
REFERENCES (TM)
LO 9-2320-272-12
All
TM 9-2320-272-10
TOOLS
TM 9-2320-272-24P
General mechanic's tool kit (Appendix E, Item 1)
EQUIPMENT CONDITION
MATERIALS/PARTS
l Parking brake Bet (TM 9-2320-272-10).
Two O-rings (Appendix D, Item 430)
l Eight splash shield removed (TM 9-2320-272-10).
Two O-rings (Appendix D, Item 470)
Transmission temperature transmitter unit
l
Two lockwashers (Appendix D, Item 416)
removed (para. 3-97).
Locknut (Appendix D, Item 306)
Two tiedown straps (Appendix D, Item 697)
Cap and plug set (Appendix C, Item 14)
Antiseize tape (Appendix C, Item 72)
CAUTION
Clean area around hoses before removal to prevent entry of dirt.
l
Damage may occur if dirt or dust enters the transmission.
Cover or plug all open hoses and connections immediately after
l
disconnect to prevent contamination. Failure to do this may
result in transmission damage.
a. Removal
NOTE
Have drainage container ready to catch oil.
l
Access to hose connection in step 1 is gained through access
l
door in cab floor.
Tag hoses for installation.
l
1.
Disconnect supply hose (1) from adapter (6).
2.
Remove adapter (6) and adapter (5) from elbow (4).
3.
Remove elbow (4) and O-ring (3) from transmission (2). Discard O-ring (3).
NOTE
Perform step 4 for vehicles equipped with front winch.
4.
Remove locknut (7) and screw (11) from hanger strap (8), and move winch hydraulic hoses (9)
and (10) and two clamps (12) aside. Discard locknut (7).
3-384
