TM 9-2320-272-24-1
3-142. TRANSMISSION OIL COOLER HOSES REPLACEMENT (Contd)
16.
Disconnect oil cooler supply hose (8) from elbow (11).
16.
Remove elbow (11) and O-ring (10) from oil cooler (9). Discard O-ring (10).
17.
Disconnect supply hose (6) from adapter elbow (6).
18.
Remove elbow (6) and O-ring (7) from oil cooler (9). Discard O-ring (7).
19.
Remove supply hose (6) from adapter elbow (4).
20.
Remove adapter elbow (4) from oil filter housing (3).
21.
Disconnect return hose (1) from elbow (2).
22.
Remove elbow (2) from oil filter housing (3).
b. Installation
CAUTION
Ensure plugs or covers are completely removed from all hoses and
connections. Failure to do this may result in transmission and oil
cooler damage.
NOTE
Male pipe threads must he wrapped with antiseize tape before
installation.
1.
Install elbow (2) on housing (3).
2.
Connect return hose (1) to elbow (2).
3.
Install elbow (4) on housing (3).
4.
Connect supply hose (6) to elbow (4).
6.
Install new O-ring (7) and elbow (6) in oil cooler (9).
6.
Connect supply hose (5) to elbow (6).
7.
Install new O-ring (10) and elbow (11) in oil cooler (9).
8.
Connect oil cooler supply hose (8) to elbow (11).
3-388
