TM 9-2320-272-24-1
1.
Clean all parts and mating surfaces (para. 2-14).
2.
Inspect all other parts (para. 2-15).
3.
Replace all parts failing inspection.
1.
Install two thermostats (9) in engine block (10).
2.
Install new gasket (8) on engine block (10).
3.
Install thermostat housing (7) on engine block (10) with two screws (6).
4.
Install new gasket (5) and adapter (4) on thermostat housing (7) with two screws (1). Tighten
screws (1) and (6)
5.
Install bracket (18) on thermostat housing (7) with four screws (17).
6.
Move alternator (15) up with bracket (16), and install two washers (14) and screws (13). Tighten
screws (13) 35 lb-ft (45 Nm).
7.
Tighten link screw (12).
8.
Install hose (2) on adapter (4) with clamp (3).
NOTE
Go to follow-on tasks.
3-193
